Skip Navigation


Ident 350 Converting Press


The Ident 350 Converting Press is the mid-range machine for larger web formats.
These machines are built robustly to exacting standards, are easy-operable and versatile.

Modular design of the 350 machine allows interchangeability of its units with any other Ident manufactured units of the same web width.

Key benefits of this machine are:

- web widths up to 350 mm;
- faster production speeds - up to 100 m/min.;
- user-firendly interface of the controls.

General Specification

  • Maximum roll diameter on the main unwind unit: 600 mm.
  • Maximum web width: 350 mm.
  • Maximum operating speed: 100 m/min.
  • Bed lengths: 4 ft (1.22 m), 6 ft (1.83 m), 8 ft (2.44 m), 9 ft (?? m), 10 ft (3.05 m).
  • Underbed unwinds and rewinds: typically up to 5 depending on the bed length.
  • Maximum roll diameter on base unwinds and rewinds: 600 mm.
  • Standard mandrel supplied: 76 mm (3'').

Options & Features

  • Gearboxes can be fitted on any of the base rewinds to allow for reverse winding. All mandrels can be either standard spring locking or switched air core.
  • Clutching types available are: mechanical friction type, where little control of the web is required; electronic clutch with either follower arm or ultrasonic feedback control, where a reasonably high level of web tension control is required; electronic clutch or servo motor with high precision transducer control and/or calculated diameter feedback, for use where a very high level of web tension control over the web is required.
  • A double rewind arm or cabinet can be fitted to give 2 additional rewinds at the outfeed end of the machine.
  • Unwind units are available for this size machines incorporating web guiders, splicing tables and digital transducer tension control.
  • There are over 40 different standard and specialist units available for the 350 converting press.